Inserting And Removing A Cf Card; Cf Card And Slot; Installing A Cf Card; Removing A Cf Card - 3Com H3C SECPATH F5000-A5 ADVANCED VPN FIREWALL 12-PORT GIGABIT ETHERNET MODULE Installation Manual

Table of Contents

Inserting and Removing a CF Card

Figure 7-28 CF card and slot

(1) Eject button

Follow these steps to install a CF card:

Step1 Check whether the CF card LED is blinking. If yes, the system is accessing the CF card. Proceed with

the next step after the LED stops blinking.

Step2 Press the CF card eject button in and make sure it does not project from the panel.

Step3 Insert the CF card into the slot and push it all the way in until it is firmly seated.

Figure 7-29 Insert a CF card into the slot

If the application program for booting the firewall is stored in an external CF card, make sure that the

right CF card has been correctly installed in the slot; otherwise the firewall will fail to boot.

Follow these steps to remove a CF card:

Step1 Check whether the CF card LED is blinking. If yes, the system is accessing the CF card. Proceed to the

next step after the LED stops blinking.

Step2 Press the CF card eject button so that the eject button projects from the panel.

(2) CF card slot

7-18

(3) CF LED

Table of Contents

Table of Contents

Do you have a question about the H3C SECPATH F5000-A5 ADVANCED VPN FIREWALL 12-PORT GIGABIT ETHERNET MODULE and is the answer not in the manual?