Install The Firewall In A Rack - 3Com H3C SECPATH F5000-A5 ADVANCED VPN FIREWALL 12-PORT GIGABIT ETHERNET MODULE Installation Manual

Table of Contents

Figure 4-3 Structure of mounting brackets

(1)

(1) Left mounting bracket

Install mounting brackets to the firewall

Before installing the firewall in the rack, fix the mounting brackets respectively to the left and right sides

of the front panel of the firewall. Figure 4-4 shows how to install the mounting brackets.

Figure 4-4 Install mounting brackets to the firewall

Install the Firewall in a Rack

Follow these steps to install the firewall in a rack:

Step1 Check the grounding and stability of the rack.

Step2 Install a support tray on the rack for the firewall. Skip this step if a support tray is already installed.

Step3 Install the mounting brackets to the left and right sides of the front panel of the firewall. Refer to

"Installing Mounting Brackets onto the Firewall" on page 4-2 for the installation.

(2)

(2) Right mounting bracket

4-3

Table of Contents

Table of Contents

Do you have a question about the H3C SECPATH F5000-A5 ADVANCED VPN FIREWALL 12-PORT GIGABIT ETHERNET MODULE and is the answer not in the manual?