Table of Contents
Advertisement
Step4 Fasten the captive screws by turning them clockwise with a Philips screwdriver.
Figure 7-25 Fasten the captive screws
Step5 Turn on the power switch of the firewall if the firewall is powered off. The fan LED RUN (green) lights up,
indicating the fans run normally.
The device supports automatic fan speed adjustment.
For the description of the fan tray LEDs, refer to Chapter 1 "Firewall Overview."
Removing a Fan Tray
Keep your hands away from the spinning fan blades when removing the fan tray.
To remove a fan tray, reverse the installation procedure.
Step1 Face the front panel of the firewall.
Step2 Loosen the captive screws on the fan tray by turning them counterclockwise with a Philips screwdriver.
7-16
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the H3C SECPATH F5000-A5 ADVANCED VPN FIREWALL 12-PORT GIGABIT ETHERNET MODULE and is the answer not in the manual?
Questions and answers