Power Supply Module - 3Com H3C SECPATH F5000-A5 ADVANCED VPN FIREWALL 12-PORT GIGABIT ETHERNET MODULE Installation Manual

Figure 1-13 An XFP transceiver
No XFP transceivers are shipped with the F5000-A5.
Use only the XFP transceivers provided by H3C. The device cannot recognize other XFP
transceivers.
For how to connect XFP transceivers, refer to the section talking about connecting Ethernet cables
in Chapter 4 "Installing the Firewall."

Power Supply Module

The F5000-A5 supports both AC and DC power input. You can select an AC power module or a DC
power module. However, never install the two types of power PSUs in the same device.
The F5000-A5 needs only one PSU for normal operation of the system. But the device provides two
slots for 1+1 redundancy.
The PSUs are hot-swappable.
Online insertion and removal of a PSU refers to first switching off the power module and then removing
it from the device or inserting it into the device.
AC power module
Table 1-26 lists the specifications for the AC power module of the device.
1-23