Upgrading An Application - 3Com H3C SECPATH F5000-A5 ADVANCED VPN FIREWALL 12-PORT GIGABIT ETHERNET MODULE Installation Manual

Upgrading an Application

The application upgrading on a serial port is implemented on the serial submenu.
Step1 Select 2 on the main menu to enter the serial submenu. For details about this submenu, refer to "Serial
Submenu" on page 6-7.
The following example shows how to upgrade the main application file main.bin:
To accelerate the upgrading speed, you can modify the serial port baud rate before upgrading the main
application file. For details, refer to "Modifying Serial Port Parameters" on page 6-11.
Step2 Select 2 on the serial submenu. The system displays:
Please Start To Transfer File, Press <Ctrl+C> To Exit.
Waiting...CCCCCCCCCCCCCCCCCCCC
Step3 Select Transfer > Send file... in the terminal window. The following dialog appears:
Figure 6-5 Send file dialog box
Step4 Click Browse... to select the application file to be downloaded, select Xmodem from the Protocol
drop-down list, and click Send. The following dialog box appears:
Figure 6-6 Sending file dialog box
After the application file is downloaded, the following information appears on terminal interface,
indicating a successful upgrade.
6-13