3Com H3C SECPATH F5000-A5 ADVANCED VPN FIREWALL 12-PORT GIGABIT ETHERNET MODULE Installation Manual page 68

Table of Contents

Table 5-1 Set serial port parameters

Bits per second

Data bits

Parity

Stop bits

Flow control

In case SecureCRT is used to configure the F5000-A5 firewall, flow control of the serial port must be

set to Xon/Xoff; otherwise, the terminal screen displays nothing or only illegible characters.

To use the default settings, click Restore Defaults.

Step4 Click OK after setting the serial port parameters to enter the HyperTerminal window, as shown in Figure

5-4.

Figure 5-4 HyperTerminal window

Step5 Set HyperTerminal properties. In the HyperTerminal window, select File > Properties from the menu,

and select the Settings tab to enter the properties setting dialog box, as shown in Figure 5-5. Select

VT100 or Auto detect, and click OK to return to the HyperTerminal window.

Item

9600 bps (default)

None

5-3

Value

Table of Contents

Chapters

Table of Contents

Do you have a question about the H3C SECPATH F5000-A5 ADVANCED VPN FIREWALL 12-PORT GIGABIT ETHERNET MODULE and is the answer not in the manual?