Lpu-Nsq1Gt8C40 - 3Com H3C SECPATH F5000-A5 ADVANCED VPN FIREWALL 12-PORT GIGABIT ETHERNET MODULE Installation Manual

4) CF card LED
Table 1-5 Description of the CF card LED
LED
CF (green)
Do not remove the CF card when the CF LED is blinking. Otherwise, the files stored on the CF card will
be damaged.
LPU–NSQ1GT8C40
Introduction
An NSQ1GT8C40 line processing unit (LPU) provides eight electrical interfaces and four Combo
interfaces, delivering high-speed service process capabilities. Note that:
An NSQ1GT8C40 LPU can be inserted in slot 1, 2, 3, or 4 of the F5000-A5.
An F5000-A5 needs to be equipped with an MPU and at least one LPU to work normally.
Figure 1-5 Front view of NSQ1GT8C40
(1) GE interface 1
(3) GE interface 5
(5) GE interface 9
(7) SFP interface 9 LED (SFP9)
(9) GE interface 11
(11) SFP interface 11 LED (SFP11)
(13) LPU LED (RUN)
(15) GE interface 10
(17) GE interface 8
(19) GE interface 4
(21) GE interface 0
(23) Captive screw
Status
OFF No CF card is present or the CF card is not recognizable.
ON A CF card is in position and has been detected.
The system is accessing the CF card. Do not remove the CF
Blinking
card in this state.
Description
(2) GE interface 3
(4) GE interface 7
(6) SFP interface 9
(8) SFP interface 8 LED (SFP8)
(10) SFP interface 11
(12) SFP interface 10 LED (SFP10)
(14) SFP interface 10
(16) SFP interface 8
(18) GE interface 6
(20) GE interface 2
(22) Eject lever
1-7