3Com H3C SECPATH F5000-A5 ADVANCED VPN FIREWALL 12-PORT GIGABIT ETHERNET MODULE Installation Manual page 104

|<1> +Main
|<2> -Main
|<3> +Backup
|<4> -Backup
|<0> Exit
======================================================================
Enter your choice(0-4):
You can set the file attribute to M (main) or B (backup), or cancel the setting. For details about attributes,
refer to "Overview" on page 6-1.
In the example, 1 is selected and the system changes the attribute of the file main.bin from B to M + B.
Set the file attribute success!
Now, the attribute of the file main_bak.bin automatically changes from M to N/A.
Setting application file attributes at the CLI
In the following description the files main.bin and main_bak.bin mentioned above are taken as
examples.
# Change the attribute of the file main.bin file from B to M + B.
<H3C> boot-loader file main.bin slot 1 main
This command will set the boot file of the specified board. Continue? [Y/N]:
The specified file will be used as the main boot file at the next reboot!
Now the attribute of the file main.bin has changed from B to M + B and the file will be used as the main
application file at the next boot, while the attribute of another existing file main_bak.bin has
automatically changed from the M to N/A.
You can verify the changes of the file attributes by viewing all the files on the file control submenu.
Select 2 from the file control submenu. The system displays the following information:
'M' = MAIN 'B' = BACKUP
======================================================================
|NO. Size(B) Time
|1 24802996 Nov/04/2007 17:03:26 M+B
|2 24802996 Nov/11/2007 15:11:42 N/A
|0 Exit
======================================================================
Enter file no:
For details about the boot-loader command, refer to H3C SecPath Series Security Products User
Manual.
'S' = SECURE 'N/A' = NOT ASSIGNED
Type Name
cfa0:/main.bin
cfa0:/main_bak.bin
6-31
|
|
|
|
|
|
|
|
|