Serial Submenu - 3Com H3C SECPATH F5000-A5 ADVANCED VPN FIREWALL 12-PORT GIGABIT ETHERNET MODULE Installation Manual

Table 6-1 BootWare main menu
Menu item
<1> Boot System
<2> Enter Serial SubMenu
<3> Enter Ethernet SubMenu
<4> File Control
<5> Modify BootWare
Password
<6> Skip Current System
Configuration
<7> BootWare Operation
Menu
<8> Clear Super Password
<9> Storage Device Operation
<0> Reboot
In the firewall, the built-in CF card is identified with cfa0, while the external CF card is identified with
cfb0.
If an application file is stored in the external CF card, you need to select 9 on the main BootWare
menu and then choose to load the application from cfb0.

Serial Submenu

Select 2 on the main menu to enter the serial submenu, where you can upgrade application files and the
BootWare program through Xmodem.
The system displays:
=========================<Enter Serial SubMenu>=======================
Load and boot system applications from a CF card.
Enter the serial port submenu.
For detailed description of this submenu, refer to "Serial
Submenu" on page 6-7.
Enter the Ethernet submenu.
For detailed description of this submenu, refer to "Ethernet
Submenu" on page 6-8.
Enter file control submenu.
For detailed description of this submenu, refer to "File Control
Submenu" on page 6-9.
Modify the BootWare password.
Skip current system configuration.
This operation takes effect only once.
This operation is generally used when you lose the password.
Enter BootWare operation submenu
For detailed description of this submenu, refer to "BootWare
Operation Submenu" on page 6-9.
Clear the super password.
The super password is used in user level switching.
No super password is set by default.
This setting is valid for the first reboot of the firewall only. The
super password will be restored after a second reboot.
Enter the storage device operation menu.
This operation allows you to select a storage medium in which the
application will be used to boot the system.
Reboot the firewall.
6-7
Description