Table of Contents
Advertisement
Figure 7-16 Loose the captive screws
Step3 Pull the MIM module out along the guide rails.
Figure 7-17 Uninstall a MIM module
Put away the removed MIM in an antistatic bag.
If you are not installing a new MIM in the empty interface module slot, install a blank panel to
prevent dust from entering the chassis. For how to install a blank panel, refer to "Installing a Blank
Panel" on page 7-4.
Inserting and Removing a CF Card
Installing a CF Card
Follow these steps to install a CF card:
Step1 Make sure that the CF card LED is not flashing before proceeding with the next step.
Step2 Press the CF card eject button in and make sure it does not project from the panel.
Step3 Insert the CF card into the slot and push it all the way in until it is firmly seated.
7-8
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the SECPATH U200-CS and is the answer not in the manual?
Questions and answers