3Com H3C SECPATH F5000-A5 ADVANCED VPN FIREWALL 12-PORT GIGABIT ETHERNET MODULE Installation Manual page 92

Item
Target File Name
Server IP Address
Local IP Address
Gateway IP Address
FTP User Name
FTP User Password
To use the default parameter after the colon, press Enter directly.
If the Ethernet port parameter CRC appears faulty, the system modifies the parameters to the
default settings and displays "Check net params crc error, use the default value."
3) After the configuration, the system automatically returns to the Ethernet submenu, where you can
select 2 to upgrade the main application file.
Loading.........
................
...... .... done
14092032 bytes downloaded!
Updating File cfa0:/main.bin
.........Done!
4) After the upgrading is finished, select 0 to return to the main menu and select 1 to reboot the
system from the CF card.
If the input application file name already exists on the CF card, the system displays "The file is exist,
will you recover it? [Y/N]". If you enter Y, the input application file overwrites the one in the CF card
and becomes the only application file of that type.
Make sure the available space in the CF card is sufficient. Otherwise, the system displays "The free
space isn't enough!"
For detailed description of file types, refer to "Overview".
Name of the target file after the file is downloaded to the firewall. The
extension of the target file needs to be the same as that of the
download file.
Note that:
The first "main.bin" is the previous file name automatically
remembered in the system.
The second "main.bin" is the file name set by the user.
IP address of the FTP/TFTP server
IP address of the interface connecting to the FTP/TFTP server.
IP address of the gateway. You need not configure this IP address.
FTP username, which will be used in FTP download. TFTP download
needs no username.
FTP password, which will be used in FTP download. TFTP download
needs no password.
6-19
Description