Dimensions Of The Firewall; Installing An N68 Rack; Installing Mounting Brackets Onto The Firewall - 3Com H3C SECPATH F5000-A5 ADVANCED VPN FIREWALL 12-PORT GIGABIT ETHERNET MODULE Installation Manual

Dimensions of the Firewall

The F5000-A5 is designed to fit standard 19-inch racks. The following table describes the dimensions of
the firewall.
Table 4-1 Dimensions of the device
Dimensions without foot pads and mounting
brackets (H × W × D)

Installing an N68 Rack

The F5000-A5 firewall can be installed in an H3C N68 rack. For the installation of an N68 rack, refer to
N68 Cabinet Installation Guide.
Skip this procedure if the firewall is to be installed in a rack other than N68 rack.

Installing Mounting Brackets onto the Firewall

Before installing the firewall in a rack, you need to install the cable management bracket to the left
mounting bracket, and fix the left and right mounting brackets to the left and right sides of the firewall
respectively.
1) Install the cable management bracket
Before installing the mounting brackets to the chassis, screw the cable management bracket to the left
mounting bracket. Figure 4-2 shows how to install the cable management bracket.
Figure 4-2 Install the cable management bracket
(1)
(1) Left mounting bracket
2) Structure of mounting brackets
Item
(2)
Description
308 × 436 × 476 mm (12.13 × 17.17 × 18.74 in.)
(2) Cable management bracket
4-2