System Specifications; Mpu-Nsq1Mpua0 - 3Com H3C SECPATH F5000-A5 ADVANCED VPN FIREWALL 12-PORT GIGABIT ETHERNET MODULE Installation Manual

System Specifications

MPU–NSQ1MPUA0
Front view
Figure 1-3 Front view of the MPU
(1) Link status LED of the management
Ethernet port (LINK)
(3) Link status LED of the HA port (LINK)
(5) CF card eject button (CF CARD)
(7) CF card LED (CF)
(9) Active LED of the MPU (ACT)
(11) Reset button (RESET)
(13) USB interface 1 (1)
(15) AUX port (AUX)
(17) HA port-10/100/1000BASE-T (HA)
(19) Ejector lever
Currently, the device supports only one MPU and the MPU must be inserted in Slot 0.
Technical specifications
Table 1-1 Technical specifications of the MPU
Item
Processor
Processor cores
Flash
Memory type and size
Console port
(2) Data reception/transmission LED of the
management Ethernet port (ACT)
(4) Data reception/transmission LED of the HA port
(ACT)
(6) CF card slot
(8) Run LED (RUN)
(10) Alarm LED (ALM)
(12) USB interface 1 LED (USB1)
(14) USB interface 0 (0)
(16) Console port (CONSOLE)
(18) Management Ethernet port-10/100/1000BASE-T
(MANAGEMENT)
(20) Captive screw
RMI XLR732 1 GHz
8
4 MB
DDR2 SDRAM
2 memory slots
2 GB (default)
Memory modules must be used in pairs with the same size.
1 (9600 bps to 115200 bps, 9600 bps by default)
1-4
Specification