Memory Module Structure; Memory Module Slot; Removing A Memory Module - 3Com H3C SECPATH F5000-A5 ADVANCED VPN FIREWALL 12-PORT GIGABIT ETHERNET MODULE Installation Manual

Memory Module Structure

Figure 7-33 Memory module structure
(1) Connector edge
(3) Latch notch

Memory Module Slot

Figure 7-34 Memory module slot
(1) Left release latch
(3) Right release latch

Removing a Memory Module

Follow these steps to remove a memory module:
Step1 Locate the card (MPU or LPU) to which you will install a memory module and put the card on a flat
worktable.
Step2 Pull the release latches away from the memory module at both ends so that the memory module is lifted
from the memory module slot.
Step3 Remove the memory module by holding its non-conductive edge.
(2) Polarization notch
(2) Memory module slot
7-21