Ppp Ipcp Dns Admit-Any; Ppp Ipcp Remote-Address Forced - H3C SecPath Series Command Manual

Command Manual – User Access
H3C SecPath Series Security Products

1.1.9 ppp ipcp dns admit-any

Syntax
ppp ipcp dns admit-any
undo ppp ipcp dns admit-any
View
Interface view
Parameter
None
Description
Use the ppp ipcp dns admit-any command to enable the firewall to accept the
unsolicited DNS address allocated by the peer without sending a DNS request. When
the firewall connects with another device through PPP (for example, when the gateway
dials up a network access server of an ISP), this allows the firewall to accept the
unsolicited DNS address allocated by the peer through negotiation and then use the
allocated DNS server to resolve domain names.
Use the undo ppp ipcp dns admit-any command to disable the firewall from
accepting the unsolicited DNS address allocated by the peer.
By default, the firewall does not accept the unsolicited DNS address allocated by the
peer.
Related command: ppp authentication-mode pap, ppp ipcp dns.
Example
# Enable the firewall to accept the unsolicited DNS address allocated by the peer.
[H3C-Dialer1] ppp ipcp dns admit-any

1.1.10 ppp ipcp remote-address forced

Syntax
ppp ipcp remote-address forced
undo ppp ipcp remote-address forced
View
Interface view
Parameter
None
Chapter 1 PPP Configuration Commands
1-8