Figure 5-4 Set Up An Environment For Remote Uploading/Downloading Using Ftp - H3C SECPATH F1000-A,SECPATH F1000-A HOST Installation Manual

Installation Manual
H3C SecPath F1000-A Firewall
Caution:
The IP addresses assigned to the network interfaces of the PC and the firewall must
reside on the same network segment.
Set up a remote uploading/downloading environment using FTP
10.110.20.13/24 10.110.20.13/24 10.110.20.13/24
PC PC PC
(FTP Client) (FTP Client) (FTP Client)

Figure 5-4 Set up an environment for remote uploading/downloading using FTP

Step 1: Connect the PC to an interface on the firewall through the WAN. The PC and
the firewall can reside on different network segments.
Step 2: Copy the application program/Boot ROM/configuration file to a directory,
"C:\version" for example.
II. Enabling the FTP server
Follow these steps under the direction of service engineers.
Step 1: Configure an authentication method.
Note:
You can configure AAA authentication as needed. For more information, see section
"AAA and RADIUS Configurations" in the Operation Manual and Command Manual of
the corresponding product.
Step 2: Add the username and password.
[VPNGateway] local-user VPNGateway
VPNGateway is the username.
Step 3: Add the password.
[VPNGateway-luser-vpngateway] password simple 123
Step 4: Add the service type and specify the FTP directory.
Router Router Router
5-10
Chapter 5 Software Maintenance
H3C SecPath F1000-A (FTP Server) H3C SecPath F1000-A (FTP Server) H3C SecPath F1000-A (FTP Server)
Et Et Et hernet interface hernet interface hernet interface
WAN WAN WAN
1 1 1 0.110.10.10/24 0.110.10.10/24 0.110.10.10/24