HP 680n - JetDirect Print Server Administrator's Manual page 97

Table 3.4 Telnet Commands and Parameters (17 of 18)
usb-mode
usb-speed
status-page-lang
Support Settings
Command
Web JetAdmin URL
Web JetAdmin
Name
support-name
support-number
ENWW
Specifies the communication mode over the USB port on the
HP Jetdirect print server.
G Auto (default): Automatically negotiates and sets the
highest communication mode possible for the attached
printer or device.
MLC: (Multiple Logical Channels) An HP-proprietary
G
communication mode that allows multiple channels of
simultaneous print, scan and status communications.
G BIDIR: A standard connection that supports
bi-directional communications between the printer and
print server. The print server sends print data and
receives status from the printer.
G UNIDIR: A standard connection in which data is
transferred in one direction only (to the printer).
(Read-only parameter, USB 2.0 products only) Specifies the
autonegotiated communication speed over the USB
connection between the HP Jetdirect print server and the
device.
G Full Speed: 12 Mbits/sec as specified in the USB v2.0
specifications, compatible with USB v1.1 specifications.
Hi-Speed: 480 Mbits/sec for USB v2.0 devices only.
G
G Disconnected: The USB port is not connected.
Specifies the printer job language (PJL) that the print server
will use to send the Jetdirect configuration/status page to the
printer.
G Auto (default): The PDL is auto-detected when the print
server is powered on or after a cold-reset.
PCL: Hewlett-Packard Printer Control Language
G
G ASCII: Standard ascii characters
G HPGL2: Hewlett-Packard Graphics Language (v2)
G PS: Postscript language
Description
(Read-only parameter) If HP Web Jetadmin discovers this
device, the URL to access HP Web Jetadmin will be
specified.
(Read-only parameter) If HP Web Jetadmin discovers this
device, the name of the HP Web Jetadmin host will be
specified (if known).
Typically used to identify the name of a person to contact for
support of this device.
Typically used to specify a phone or extension number to
call for support of this device.
TCP/IP Configuration 97