HP 680n - JetDirect Print Server Administrator's Manual page 116

Hp jetdirect 200m print server - (english) administrator guide
Hide thumbs Also See for 680n - JetDirect Print Server:
Table of Contents

Advertisement

Table 4.3
802.11B Configuration Parameters (4 of 7)
Item
Server ID
Require Exact
Match
Encryption
Strength
Jetdirect
Certificate
CA Certificate
ENWW
Description
(EAP-TLS, EAP-TTLS only) Specify the Server ID validation string
that identifies and validates the authentication server. The Server
ID string is specified on the digital certificate issued by a trusted
Certificate Authority (CA) for the authentication server. The entry
may be a partial string unless the Require Exact Match is
enabled.
(EAP-TLS, EAP-TTLS only) Enable (check) or disable (clear)
whether the Server ID string entry must match exactly the string
received from the authentication server during 802.1x EAP
authentication.
Specify an encryption strength to be used during communications
with the authentication server. You may select Low, Medium, or
High encryption strength. For each encryption strength, ciphers
are specified to identify the weakest cipher allowed.
Early browsers may only support 40-bit (Low) encryption levels.
(EAP-TLS only) An X.509-compliant digital certificate that
validates the Jetdirect print server identity must be installed. In
general, a Jetdirect certificate may be self-signed or provided by
an independent trusted source, such as a Certificate Authority. By
factory default, a self-signed Jetdirect certificate is preinstalled.
While self-signed certificates are sometimes permitted, they do
not provide true client validation. Therefore, for EAP
authentication methods that require a Jetdirect certificate, it must
be provided by a trusted third party or Certificate Authority.
To update an existing certificate, or to install a new certificate, click
Configure. Installing a new certificate will overwrite the existing
certificate.
If you request a certificate from an independent Certificate
Authority, you will not be able to complete the EAP/802.1x
configuration until your digital certificate has been received and
installed.
(PEAP, EAP-TLS, EAP-TTLS only) To validate the authentication
server's identity, a CA (or "Root") certificate must be installed on
the print server. This CA certificate must be issued by the
Certificate Authority who signed the authentication server's
certificate.
To configure or install a CA certificate, click Configure.
Using the Embedded Web Server 116

Advertisement

Table of Contents
loading

Table of Contents