HP 680n - JetDirect Print Server Administrator's Manual page 135

Hp jetdirect 200m print server - (english) administrator guide
Hide thumbs Also See for 680n - JetDirect Print Server:
Table of Contents

Advertisement

Table 4.9
LPD Queue Parameters (2 of 3)
Item
Queue Type
Default Queue
Name
String Name
ENWW
Description
Processing instruction for the queue. Choose from these four
queue types:
RAW -- No processing. The line printer daemon treats the
G
data in a raw queue as a print job that has already been
formatted in PCL, PostScript, or HP-GL/2, and sends it to the
printer without modification. (Note that any user-defined
prepend or append string will be added to the job in the
appropriate position.)
G
TEXT -- Carriage return added. The line printer daemon treats
data in text queues as unformatted or ASCII text, and adds a
carriage return to each line before sending it to the printer.
G
AUTO -- Automatic. The line printer daemon uses
autosensing to determine whether the print data should be
sent as raw or text.
BINPS -- Binary PostScript. This instructs the PostScript
G
interpreter that the printjob is to be interpreted as Binary
PostScript data.
Name of the queue to be used if the queue specified for a print
job is unknown. By default, the Default Queue Name is AUTO.
Name of a character string. You may define up to eight character
strings for use in LPD queues; this parameter names the string,
and the Value parameter defines the content of the string.
Prepend and Append string names (specified in the table at the
top of the browser window) must be chosen from the names
specified here. The string name can be up to 32 characters long,
and can consist of any displayable ASCII characters.
Using the Embedded Web Server 135

Advertisement

Table of Contents
loading

Table of Contents