HP 680n - JetDirect Print Server Administrator's Manual page 143

Authorization
The Authorization page provides tabs that allow you to control
access to the device, as well as to device configuration and
management features. In addition, you may configure certificates
for client and server authentication.
Admin. Account
Use this page to set an administrator password for controlled access
to Jetdirect configuration and status information. The
administrator password is shared by Jetdirect configuration tools,
such as the embedded Web server, Telnet, and HP Web Jetadmin.
If a password is set and you attempt to access the Jetdirect print
server through these tools, you will be prompted for a user name
and this password before you are allowed access.
Note
A checkbox allows you to synchronize HP Web Jetadmin and the
SNMP v1/v2c Set Community Name.If you enable this feature (the
checkbox is checked), the administrator password will also be used
as the SNMP Set Community Name for SNMP v1/v2c management
applications.
Note
ENWW
The administrator password may be cleared by a
cold reset of the print server, which resets the print
server to factory default settings.
If you subsequently change the SNMP Set
Community Name (for example, using the SNMP
tab on the Network Settings page or from Web
Jetadmin), the two settings will no longer be
synchronized.
Using the Embedded Web Server 143