HP 680n - JetDirect Print Server Administrator's Manual page 186

Table 7.2 Settings for Access Control
Settings
G Unused protocols disabled
G HTTPS access enabled using
certificates issued by trusted
sources
G Wireless Jetdirect print servers
configured for 802.1x EAP
authentication that use
dynamic encryption
G SNMP v3 enabled, SNMP
v1/v2c disabled
G Telnet disabled
G Passwords set
G The Access Control List
contains specified entries and
HTTP connections are
checked
G Printer control panel locked
ENWW
Level of Access Control
High
High security for non-trusted, professionally
managed environments.
Access is limited to authenticated hosts that are
specified in the Access Control List. Encryption
provides data privacy; network communication in
plain-text is not used.
CAUTION: Power-on settings (for example,
configurations from a BootP/TFTP or
DHCP/TFTP server) may change the print
server's settings when it is power-cycled. Be sure
to confirm your intended power-on settings.
Security Features 186