HP 680n - JetDirect Print Server Administrator's Manual page 132

Hp jetdirect 200m print server - (english) administrator guide
Hide thumbs Also See for 680n - JetDirect Print Server:
Table of Contents

Advertisement

Table 4.8
Miscellaneous Settings (5 of 5)
Item
mDNS Highest
Priority Service
Firmware Upgrade
For print servers that support firmware upgrades, this page allows
you to upgrade the print server with new features.
The firmware upgrade file for the print server must be available on
your system. To identify and retrieve the appropriate upgrade file,
visit HP online support at:
http://www.hp.com/go/webjetadmin_firmware
On that page, do the following:
1. Locate the print server model and the upgrade file.
2. Check the upgrade file version and verify that it is more recent
than the print server's installed version. If it is, then download
the file. If not, then you do not need to upgrade.
To upgrade the print server using the embedded Web server:
1. Enter the path to the upgrade file or click Browse to locate it.
2. Then click Upgrade Firmware.
ENWW
Description
Specifies the mDNS highest priority service to use for printing.To
set this parameter, choose one of the following printing options:
9100 Printing: Raw IP printing through HP-proprietary port 9100.
IPP Printing: Internet Printing Protocol printing.
LPD Printing (RAW): Default LPD raw queue printing.
LPD Printing (TEXT): Default LPD text queue printing.
LPD Printing (AUTO): Default LPD auto queue printing.
LPD Printing (BINPS): Default LPD binary postscript queue
printing.
LPD Printing (<user-defined>): Up to 5 user-specified LPD
queues will be listed if they have been configured, where
<user-defined> is the name of the user-specified LPD print
queue.
The default selection will depend on the printer, typically 9100
Printing or LPD Printing (BINPS).
Using the Embedded Web Server 132

Advertisement

Table of Contents
loading

Table of Contents