HP 680n - JetDirect Print Server Administrator's Manual page 234

Table 9.12 Error Messages (4 of 11)
Error Code and
Message
17 UNABLE TO FIND
SERVER
18 PASSWORD
ERROR
19 NO QUEUE
ASSIGNED
1A PRINTER NUMBER
NOT DEFINED
1B PRINTER NUMBER
IN USE
1C PRINT SERVER
NOT DEFINED
ENWW
Description
(Ethernet) The HP Jetdirect print server was unable to find
the NetWare print server (Remote Printer mode) or file
server (Queue Server mode). (There was no response to
service queries for advertising print servers or file servers
that matched the configured print server or file server
name.)
Make sure that the print server or file server is running and
that the print server or file server name configured on the
HP Jetdirect print server matches the actual name used by
the print server or file server. Also make sure that all cables
and routers are functioning correctly.
The HP Jetdirect print server detected that the password for
the NetWare print server object is wrong. Use a NetWare
utility (such as PCONSOLE) to erase the password for the
print server object. When the HP Jetdirect print server logs
on again, it sets a new password.
Note: When multiple file servers are configured, the error is
only displayed on the configuration page if none of the file
servers are connected.
The HP Jetdirect print server detected that the print server
object has not been assigned any queues to service. Assign
queues to the print server object using printer installation or
NetWare utilities.
Note: When multiple file servers are configured, the error is
only displayed on the configuration page if none of the file
servers were successfully connected.
A NetWare printer number for this printer has not been
configured. Assign a valid printer number to the HP Jetdirect
print server. Use a NetWare utility (such as PCONSOLE),
the Jetdirect embedded Web server, or other tool to assign
a printer number.
The NetWare printer number assigned to the printer is
already in use by another printer. Assign an unused printer
number. This may also occur when a printer is powered
off/on, in which case the error goes away after the print
server times out and detects the lost connection.
The file server does not have a print server object that
corresponds to the specified NetWare node name. Use
printer installation software, a NetWare utility (such as
PCONSOLE), or other tool to create the print server object.
When the HP Jetdirect print server is configured for multiple
file servers, the error is only displayed on the configuration
page if none of the file servers made the connection.
HP Jetdirect Configuration Page 234