HP 680n - JetDirect Print Server Administrator's Manual page 235

Hp jetdirect 200m print server - (english) administrator guide
Hide thumbs Also See for 680n - JetDirect Print Server:
Table of Contents

Advertisement

Table 9.12
Error Messages (5 of 11)
Error Code and
Message
1D UNABLE TO
CONNECT TO
SERVER
1E FAIL RESERVING
PRINTER NUM
1F ERR
NEGOTIATING
BUFFER SIZE
20 UNABLE TO LOGIN A failure was detected when the HP Jetdirect print server
21 UNABLE TO SET
PASSWORD
22 UNABLE TO
CONNECT TO
SERVER
ENWW
Description
Remote Printer mode error: The HP Jetdirect print server
was unable to establish an SPX connection with the
NetWare print server. Make sure that the NetWare print
server is running and that all cables and routers are
functioning correctly.
The SPX connection to the print server was lost when the
HP Jetdirect print server attempted to reserve the printer
number. This indicates a possible network problem, or a
problem with the print server. Make sure all cables and
routers are functioning correctly. Try restarting the print
server.
A failure was detected when selecting the buffer size to be
used when reading print data from the file server. This may
indicate a network problem.
When the HP Jetdirect print server is configured for multiple
file servers, the error is only displayed on the configuration
page if none of the file servers was successfully connected.
tried to log onto the file server. This could be caused by the
print server object not existing on the file server, or by a
security check that prevents the print server from logging in.
Make sure the file server name and print server object name
are correct. Use PCONSOLE to erase the password for the
print server object. Create a new print server object.
When the HP Jetdirect print server is configured for multiple
file servers, the error is only displayed on the configuration
page if none of the file servers made the connection.
A failure was detected when the HP Jetdirect print server
tried to set the password for the print server object.
(Whenever the HP Jetdirect print server is able to log in
without a password, it sets the password automatically.)
This indicates a networking or security problem. Create a
new print server object.
When multiple file servers are configured, the error is only
displayed on the configuration page if none of the file
servers were successfully connected.
Queue Server mode error: The HP Jetdirect print server
could not establish an NCP connection to the file server.
Make sure that the correct file servers are connected.
When multiple file servers are configured, the error is only
displayed on the configuration page if none of the file
servers were successfully connected.
HP Jetdirect Configuration Page 235

Advertisement

Table of Contents
loading

Table of Contents