HP 680n - JetDirect Print Server Administrator's Manual page 123

Hp jetdirect 200m print server - (english) administrator guide
Hide thumbs Also See for 680n - JetDirect Print Server:
Table of Contents

Advertisement

Table 4.5
IPX/SPX Settings (1 of 2)
Item
IPX/SPX Enable
IPX/SPX Frame
Type
SAP Interval
Print Server Name Specify a NetWare printer name for the HP Jetdirect print server
NDS Tree Name
ENWW
Description
Enables or disables the IPX/SPX protocols on the HP Jetdirect
print server. If the checkbox is empty, IPX/SPX is disabled.
Specify the IPX/SPX frame type to be used by the HP Jetdirect
print server on your network. After a frame type has been
configured, all others will be counted and discarded.
G
AUTO (default) senses all frame types and configures the first
one detected.
EN_8023 limits the frame type to IPX over IEEE 802.3 frames.
G
G
EN_II limits the frame type to IPX over Ethernet frames.
G
EN_8022 limits the frame type to IPX over IEEE 802.2 with
IEEE 802.3 frames.
G
EN_SNAP limits the frame type to IPX over SNAP with
IEEE 802.3 frames.
TR_8022 limits the frame type to IPX over IEEE 802.2 LLC
G
with IEEE 802.5 frames.
G
TR_SNAP limits the frame type to IPX over SNAP with
IEEE 802.5 frames.
Specifies the time interval (in seconds) that the HP Jetdirect
print server waits to send Service Advertising Protocol (SAP)
messages, which are broadcast to advertise its service
capabilities on a Novell NetWare network. To disable SAP
messages, use the value "0".
(alphanumeric characters only). The default name is NPIxxxxxx,
where xxxxxx are the last six digits of the HP Jetdirect print
server's LAN hardware (MAC) address.
Specify the name of the NDS tree for this device. The NDS
(Novell Directory Services) tree name refers to the name of the
organizational tree used by your network. To disable NDS
support, leave this field blank.
Using the Embedded Web Server 123

Advertisement

Table of Contents
loading

Table of Contents