HP 680n - JetDirect Print Server Administrator's Manual page 20

HP Jetdirect Wireless Setup Wizard
The HP Wireless Setup Wizard is a software utility that configures
your HP Jetdirect wireless print server with a wireless connection
to your network.
Note that the HP Wireless Setup Wizard does not install the printer
on your system. After a wireless network connection is established,
you must use other HP printer installation utilities, or standard
Operating System tools, to install the printer on your network
systems. When installing the printer on a system, the wireless
printer should appear like any other printer on your network.
The HP Wireless Setup Wizard is provided on CD-ROM with each
HP Jetdirect wireless print server. The wizard must be run on a
supported wireless computer that has been preconfigured to
communicate with the HP Jetdirect print server. A version of the
HP Wireless Setup Wizard that runs from your system disk is also
available, and can be downloaded from HP online support at:
www.hp.com/go/jdwsw_software
Note
Requirements
G Wireless computer, typically a laptop PC
G Microsoft Windows XP (32-bit only), Windows 2000, Windows NT
4.0, Windows 98, Windows Me
ENWW
Although primarily intended for configuration of
wireless networking parameters, the HP Wireless
Setup Wizard also allows you to preconfigure a valid
IP address on the print server, as required (for
example, to accommodate special DHCP
requirements or Access List restrictions).
HP Software Solutions Summary 20