Menu Button - JVC KY-F70U - Sxga Imaging Camera Less Lens Instructions Manual

[Rear]
SCSI
MENU
MONITOR
REMOTE
ON 1 2 3 4
SEE INSTRUCTION MANUAL

MENU button

Press this button to output the menu screen
from the MONITOR terminal.
Press the button once more to clear the
menu screen.
Setting in the menu screen (
SEND/UP button
Press this button to output the same still
image* that is being outputted to the
MONITOR terminal to an MO drive or
printer.
Save images in memory to an MO disk (
page 36)
Output images in memory to a printer (
page 37)
* A still image refers to an image recorded
by pressing the FREEZE button while in
the REC mode or an image being played
back in the PLAY mode.
REC
MODE
SEND AW/SEL
UP DOWN SET
PLAY
FREEZE
LENS
DC IN
POWER
page 44)
While the menu screen is being dis-
played, press this button selected item
up.
While an item is selected, use this but-
ton to change the set value.
Setting in the menu screen (
AW/SEL/DOWN button
[AW (Auto White)]
Press this button to adjust the white bal-
ance when the light source of the sub-
ject is changed.
White balance adjustment (
[SEL (Select)]
Pressing this button each time while in
the PLAY mode will switch to the previ-
ous image in memory.
* The PLAY mode refers to the condition
which the unit is playing back recorded
images from the memory.
Playing back images from memory (
page 33)
[DOWN]
While the menu screen is being dis-
played, press this button selected item
down.
While an item is selected, use this but-
ton to change the set value.
Setting in the menu screen (
page 44)
page 28)
page 44)
E9