Saving Images From The Memory To An Mo Disk - JVC KY-F70U - Sxga Imaging Camera Less Lens Instructions Manual

4. Basic operations (continued)

Saving images from the memory to an MO disk

It is possible to save images stored in the main unit memory to an MO drive connected via the
SCSI terminal when in the FREEZE or PLAY mode.
(To output to an MO drive connected to a PC, see Page 64 7. Connecting to a PC)
SEND
MENU
@ @ @ @ @ @
SCSI
SEND
MENU UP
SCSI
terminal MONITOR
REMOTE
ON 1 2 3 4
SEE INSTRUCTION MANUAL
Dip switches
WR I T
OK
CANCE L: " MENU "
WR I T
OPER
WR I T
F I L E NAM
E36
1.
MODE
REC
MODE
AW/SEL
2.
DOWN SET
PLAY
FREEZE
LENS
DC IN
ON 1 2 3 4
POWER
3.
Undefined
4.
E TO MO
OK ?
: " MODE "
5.
E TO MO
AT I O N
E TO MO
O K
E : F 7 0 0 0 0 1. T I F
Set to either the FREEZE or PLAY mode.
Check to make sure that dip switches 1 and 2 are set to
OFF as shown in the diagram on the left.
Press the SEND button. WRITE TO MO OK? message
will appear on the monitor connected to the MONITOR
terminal.
To write to the MO, press the MODE button (to cancel,
press the MENU button). While in operation, WRITE TO
MO OPERATION will appear for approximately 3 sec-
onds.
When data is successfully written to the MO, WRITE
TO MO OK FILE NAME: F70
approximately 3 seconds. (each
When data is not successfully written to the MO, one of
the following error messages will appear for approxi-
mately 3 seconds.
ERROR : SCSI (check the cable)
ERROR : WRITE (write error)
ERROR : FORMAT (format the disk)
ERROR : DISK (bad MO disk)
ERROR : DIRECTRY (directory error)
ERROR : READ (read error)
ERROR : MO (Other MO disk error)
.TIF will appear for
indicates a number)