Connecting The Power - JVC KY-F70U - Sxga Imaging Camera Less Lens Instructions Manual

2. Before recording (continued)

Connecting the power

Connect the DC IN terminal on the rear of the main unit and the TO CAMERA terminal of the AC
adapter (AA-P700) with the attached power supply cable (2m).
@ @ @ @ @ @
AC
Before connecting, make sure that the power switch of the AA-P700 is set to OFF. Connecting
with the power turned on may result in malfunction.
Plug
E18
AA-P700
DC 12V=OUTPUT
AC 100V
S(Y/C) OUTPUT
EITHER
OUTPUT
MAX 1.25A
AC adapter
Ring
VIDEO OUTPUT
TO CAMERA
SEE INST-
RUCTION
MANUAL
Attached power supply cable
After inserting the plug completely, securely fasten by
turning the ring.
To reduce emission of unwanted electrical waves, mount
the attached ferrite core as shown in the diagram on
the left.
Mount the ferrite core as close to the main unit as pos-
sible as shown in the diagram.
Connect the plug to the AC adapter side in the same
manner.
SCSI
REC
SEND AW/SEL MODE
MENU UP DOWN SET
PLAY
FREEZE
LENS
MONITOR
REMOTE
DC IN
POWER
ON 1 2 3 4
SEE INSTRUCTION MANUAL
Clamp filter