Various Recording Methods; Recording A Pc Monitor - JVC KY-F70U - Sxga Imaging Camera Less Lens Instructions Manual

5. Various recording methods

Recording a PC monitor

Horizontal line noise will appear on the screen when attempting to record images on a PC
monitor or display. To clear this noise, the main unit shutter speed must be adjusted with scan
speed of the monitor.
@ @ @ @ @ @
PC monitor
- - - REC MENU ( QU I CK ) - - -
AE L EVE L 0
:
I R I S L EVE L 1 2 8
:
SHUTERE : V. SCAN
/
: 1 3 0
SPEED
: S TEP
SENS I T I V I TY
I
L EVE L : I S O1 0 0
I S O4 0 0
A LC MAX :
SEND PRI O RI TY : MO
REC quick menu screen
MEMO
• The vertical scan frequency differs depending on the PC type and the bar may not be completely
cleared away. The frequency may also change depending on the software used.
E40
1.
Press the MODE button to enter the REC mode (REC
LED on), then lightly press the MENU button to display
the REC quick menu screen.
2.
Press the DOWN button to select SHUTTER, then press
Bar
SET (SHUTTER will be displayed in purple).
3.
Use the DOWN button to change the set value to V.
SCAN, then press the SET button (SHUTTER will re-
turn to white).
4.
Next, press the DOWN button to select SHUTTER
SPEED, then press the SET button.
5.
Press either UP or DOWN to change the shutter speed.
When a black bar can be seen on the screen:
decrease the shutter speed by pressing the DOWN
button.
When a white bar can be seen on the screen:
increase the shutter speed by pressing the UP button.
6.
Press the SET button when the bar is at its minimum.
MEMO
At this time, pressing the MENU button will return the unit to its
previous settings without confirming the changes.
7.
Press the MENU button to return to the normal screen.