Connecting a monitor
Connect the PC monitor (VGA) to the MONITOR terminal on the rear of the main unit.
Before connecting, make sure that the power of all systems are turned off. Connecting with the
power turned on may result in malfunction.
For the connector, commercially available VGA video cable is recommended.
For the pin assignment, see page 13 Explanation of terminals
SCSI
REC
SEND
AW/SEL
MODE
MENU
UP
DOWN
SET
PLAY
FREEZE
LENS
MONITOR
REMOTE
DC IN
POWER
ON 1 2 3 4
SEE INSTRUCTION MANUAL
MONITOR terminal
E19