Configuring Cisco Unified Ip Phones In Cisco Unified Communications Manager; Checklist For Configuring The Cisco Unified Ip Phone 7962G And 7942G In Cisco Unified Communications Manager - Cisco CP-7942G Software Manual

Overview of Configuring and Installing Cisco Unified IP Phones
Configuring Cisco Unified IP Phones in Cisco Unified Communications
Manager
To add phones to the Cisco Unified Communications Manager database, you can use:
•
•
•
•
For more information about these choices, see the
Manager Database" section on page
For general information about configuring phones in Cisco Unified Communications Manager, refer to
the "Cisco Unified IP Phone" chapter in Cisco Unified Communications Manager System Guide.
Checklist for Configuring the Cisco Unified IP Phone 7962G and 7942G in Cisco Unified
Communications Manager
Table 1-6
IP Phone 7962G and 7942G in Cisco Unified Communications Manager Administration. The list
presents a suggested order to guide you through the phone configuration process. Some tasks are
optional, depending on your system and user needs. For detailed procedures and information, refer to
the sources in the list.
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
1-18
Auto-registration
Cisco Unified Communications Manager Administration
Bulk Administration Tool (BAT)
BAT and the Tool for Auto-Registered Phones Support (TAPS)
provides an overview and checklist of configuration tasks for the Cisco Unified
Chapter 1
"Adding Phones to the Cisco Unified Communications
2-8.
An Overview of the Cisco Unified IP Phone
OL-15483-01