Chapter 3
Configuring the Cisco Unified IP Conference Station 7936
Step 8
Resetting the Cisco Unified IP Conference Station
Caution
Erasing the Local Configuration
Caution
Step 1
Step 2
Step 3
OL-10751-01
Press the Up or Down scroll button to select SW Version.
The firmware version number is displayed.
To reset the Cisco Unified IP Conference Station, press * * # * * on the dialing
pad while the phone is in menu screens. The following message appears:
Restarting.
The Cisco Unified IP Conference Station re-starts and goes through the startup
process.
If you reset the Cisco Unified IP Conference Station, any changes made that have
not been saved are lost and set back to the previous settings.
If you want to erase all locally-stored configuration options, you can do so by
restoring all settings to their factory default values, including enabling DHCP.
Erasing the local configuration removes all user-defined changes made locally on
the Cisco Unified IP Conference Station, including the Phone Book. If you
choose this option, these settings are set back to their original, default values.
To restore the default settings, follow these steps:
Procedure
Press the Menu button.
Press the Up or Down scroll button to select the Admin Setup menu.
Press the Select button.
Cisco Unified IP Conference Station 7936 Administration Guide
Resetting the Cisco Unified IP Conference Station
3-19