Assigning A Default Gateway - Cisco 7936 - IP Conference Station VoIP Phone Administration Manual

Accessing Network Configuration Settings
Step 1
Step 2
Step 3
Step 4

Assigning a Default Gateway

Note
Step 1
Step 2
Cisco Unified IP Conference Station 7936 Administration Guide
3-12
To manually configure a subnet mask, follow these steps:
Procedure
Press the Up or Down scroll button to select IP Mask.
The current IP Mask is displayed.
Use the < softkey to delete the current subnet mask.
Use the dialing pad to enter a new subnet mask.
Use the . softkey to enter periods (.) and the < softkey to correct any mistakes.
Press the Validate softkey to check the IP address, mask and router. Press the
Save softkey to save your changes.
You can only manually assign a default gateway if DHCP is disabled.
When you manually assign an IP address to an
Cisco Unified IP Conference Station, you can assign the default gateway to be
used.
To manually configure a default gateway, follow these steps:
Procedure
Press the Up or Down scroll button to select Router 1.
The current router IP address is displayed.
Use the < softkey to delete the current IP address.
Chapter 3 Configuring the Cisco Unified IP Conference Station 7936
OL-10751-01