Chapter 3
Configuring the Cisco Unified IP Conference Station 7936
Assigning an Ethernet Port Configuration
Step 1
Step 2
Step 3
Configuring the HTTP Port
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
OL-10751-01
To assign an ethernet port configuration, follow these steps:
Procedure
Press the Up or Down scroll button to select Port Config. The current Ethernet
port config is displayed.
Press the Next Mode softkey until the desired mode is displayed.
Press the Save softkey to save your changes.
For increased security, you might want to change the HTTP Port number.
To set the HTTP Port number, follow these steps:
Procedure
Press the Menu button.
Press the Up or Down scroll button to select the Admin Setup menu.
Press the Select button.
Enter the administrator password. (The default administrator password is **#.)
Press the Enter softkey.
Press the Up or Down scroll button to select HTTP Port Change, and then press
the Select button.
Cisco Unified IP Conference Station 7936 Administration Guide
Accessing Network Configuration Settings
3-17