Default Settings - Cisco 7936 - IP Conference Station VoIP Phone Administration Manual

Erasing the Local Configuration
Step 4
Step 5
Step 6
Step 7

Default Settings

Table 3-3 Cisco Unified IP Conference Station Default Settings
Setting (Default Value)
Administrator password
(**#)
End-user password
(7936)
CM1 address
(no default)
Cisco Unified IP Conference Station 7936 Administration Guide
3-20
Enter the administrator password (the default administrator password is **#), and
press the Enter softkey.
Press the Down scroll button to select Restore Defaults.
Press the Select button.
The following message appears:
All settings and data will be lost, including the Phone Book entries.
Press Yes to confirm or No to exit.
Press the Yes softkey to confirm the restore, or press the No softkey to exit.
A message appears confirming that the settings have been restored to the defaults
and the Cisco Unified IP Conference Station will restart.
You must hang up all calls before you can restart the
Note
Cisco Unified IP Conference Station.
Table 3-3 provides the Cisco Unified IP Conference Station default settings.
Valid Options
-
-
-
Chapter 3 Configuring the Cisco Unified IP Conference Station 7936
Administrator- User-
controlled controlled
Y N
Y N
N N
Notes
Set by Cisco Unified
CallManager (via the
.cnf.xml file)
OL-10751-01