Assigning A Domain Name - Cisco 7936 - IP Conference Station VoIP Phone Administration Manual

Chapter 3 Configuring the Cisco Unified IP Conference Station 7936
Step 3
Step 4

Assigning a Domain Name

Step 1
Step 2
Step 3
Step 4
OL-10751-01
Use the dialing pad to enter a new IP address.
Use the . softkey to enter periods (.) and the < softkey to correct any mistakes.
Press the Validate softkey to check the IP address, mask and router. Press the
Save softkey to save your changes.
The domain name is the name of the Domain Name System (DNS) domain in
which the IP Conference Station is located.
DNS is used on the Internet for translating names of network nodes into addresses.
For detailed information about DNS, refer to
System.
To manually configure a domain name, follow these steps:
Procedure
Press the Up or Down scroll button to select Domain.
The current domain is displayed.
Use the dialing pad to enter a new domain name.
To enter letters, use the numbers associated with a particular letter.
For example, the 2 key has the letters ABC. For a lower case "a," press 2 twice.
Press the 2 key repeatedly to scroll through the available letters and numbers.
Pause after the selected letter appears on the display.
Press the < softkey to correct any mistakes. Press the .sp-_ softkey to use a period
(.), space, dash (-), or underscore (_) character.
Press the Validate softkey to check the name format.
Press the Save softkey to save your changes.
Cisco Unified IP Conference Station 7936 Administration Guide
Accessing Network Configuration Settings
Understanding the Domain Name
3-13