Installation and operating manual
2.1.2 Foreseeable misuse
Foreseeable misuse is deemed to have occurred if the product or the accessories are used in any other
way than that described in the section "Intended use". Foreseeable misuse includes using the product or
accessories in a manner that is not intended by the manufacturer or suppliers but that may occur due to
foreseeable human behavior.
Foreseeable misuse includes:
•
The execution of any kind of modification, in particular constructive and process-technology related
interventions.
•
Disabling or failing to use available or recommended safety equipment.
•
Use for filtering wastewater other than compressor condensate (e.g., industrial wastewater).
•
Disposal of waste oils.
•
Using the product on water vessels, railway vehicles and motor vehicles.
This list is not exhaustive as not all possible inappropriate use can be foreseen in advance. If the operating
company is aware of any inappropriate use of the product or accessories which are not listed here, the
manufacturer must be informed immediately.
2.2 Responsibility of the operating company
The responsible operating company must ensure the following to prevent accidents, incidents and adverse
effects on the environment:
•
Before all actions, check to ensure that the manual available does in fact belong to the product.
•
The product and the accessories are used, serviced and repaired in accordance with the intended use.
•
The product and accessories are only used with the recommended and fully operable safety equipment.
•
All assembly, installation and maintenance work is carried out by qualified skilled technical personnel
only.
•
Personnel have the required personal protective equipment, and this equipment is used.
•
Suitable technical safety measures are taken to ensure that the permissible operating parameters are
observed.
•
Keep all safety symbols and the type plate on the product and accessories in a legible state. Replace
damaged and illegible markings immediately.
•
All locally applicable legal requirements and regulations regarding the protection of bodies of water, as
well as the associated mandatory documentation obligations (e.g., results from turbidity test, retention
periods), must be complied with.
QWIK-PURE
CS
®
7 | 68
Need help?
Do you have a question about the QWIK-PURE CS 400 and is the answer not in the manual?