Beko QWIK-PURE CS 400 Installation And Operating Manual page 10

QWIK-PURE CS
®
2.5 Safety instructions and warning notices
This section provides an overview of all the important safety aspects for personal protection as well as for the
safe and problem-free operation of the product and accessories.
The following sections list the dangers posed by this product and the accessories even with intended use.
To minimize the risk of personal injury and property damage and to avoid dangerous situations, observe the
safety instructions listed and adhere to the warning notices in the other sections of this manual.
Basic warning notices and the necessary qualifications of skilled technical personnel are always listed at the
beginning of the section in the "Warning notices" section.
Warning notices related to specific actions are printed directly before potentially hazardous procedures or
sequences of actions.
As well as causing personal injury, failure to observe safety instructions and warning notices may result in
malfunctions, disruption to operations, and property damage.
2.5.1 Basic safety instructions
• Before starting work, refer to the technical documentation for the entire system and observe the overall
operating instructions.
• Carry out a risk assessment before starting work on site (last minute risk assessment).
• Use suitable personal protective equipment for all work.
• Set up a safety area around the working area during all installation, maintenance and repair work.
• Use existing system-specific protection procedures (e.g., LOTO procedure) in order to safely de-energize
and isolate the system or system sections.
2.5.2 Safe operation
The following actions may result in serious injury or death:
• Setting up and operating the product and accessories outside the permissible limits and operating
parameters
• Unauthorized interference and unauthorized modifications of the product and accessories
To guarantee the safe operation of the product and accessories, observe the following:
• Observe the limits and operating parameters specified on the type plate and in the manual.
• Check whether the permissible operating parameters have been changed or restricted by the use of
accessories.
• Observe the installation conditions and the ambient conditions.
• Adhere to the maintenance intervals.
10 | 68
Installation and operating manual