Beko QWIK-PURE CS 400 Installation And Operating Manual page 49

Installation and operating manual
9.3.3.2 Cleaning work
For cleaning work to be carried out, the following prerequisites must be fulfilled and the respective
preparatory tasks must have been completed.
Tools
If there is heavy soiling:
• Collecting container
Degree of
soiling
Soiled connecting
pipe
Prerequisites
Material
If there is mild soiling:
• Warm water
• Cotton cloth or disposable cloth
If there is heavy soiling:
• Warm water
• Standard dish detergent
Figure Description / explanation
Preparation work:
1. The product must have been shut down.
2. The assembly you will be cleaning must
3. Bring the assembly unit to be cleaned to
Cleaning:
•
Concluding work:
1. Dry the cleaned assembly with a cotton
2. Take the cleaned and dried assembly to
3. Put the product back into operation (please
Protective equipment
To be worn at all times:
have been disassembled (please refer to
section "12. Disassembly" on page 57).
a washing station with an integrated oil
separator.
Flush the connecting pipe with warm water.
cloth.
where the product has been installed
and install it (please refer to section "6.
Installation" on page 26).
refer to section "7. Commissioning" on
page 36).
QWIK-PURE CS
®
49 | 68