Beko QWIK-PURE CS 400 Installation And Operating Manual page 50

QWIK-PURE CS
®
Degree of
soiling
Soiled pressure
relief chamber
50 | 68
Figure Description / explanation
Preparation work:
1. The product must have been shut down.
2. The assembly you will be cleaning must
3. Bring the assembly unit to be cleaned to
Cleaning:
•
Concluding work:
1. Dry the cleaned assembly with a cotton
2. Take the cleaned and dried assembly to
3. Put the product back into operation (please
Installation and operating manual
have been disassembled (please refer to
section "12. Disassembly" on page 57).
a washing station with an integrated oil
separator.
Flush the pressure relief chamber with
warm water.
cloth.
where the product has been installed
and install it (please refer to section "6.
Installation" on page 26).
refer to section "7. Commissioning" on
page 36).