Beko QWIK-PURE CS 400 Installation And Operating Manual page 12

QWIK-PURE CS
®
2.5.5 Installation
Improper physical or electrical installation of the product and accessories may result in personal injury and
property damage as well as impair operation.
For safe physical and electrical installation, observe the following:
• Assemble the product and all the parts, accessories and materials used free of mechanical stress.
• Check all plug-type connections for a correct fit.
• Avoid stumbling risks by routing cables and hoses accordingly.
• Avoid mechanical stress on the cables.
• Fix and fasten hoses in such a way that they cannot flap around.
• Install the inlet and drain lines as fixed pipes.
2.5.6 Maintenance
Improperly carrying out maintenance and repair work may result in serious injury or death.
For safe maintenance and repairs, observe the following:
• Before starting work, depressurize the pressurized product and accessories and secure them against
unintentional pressurization.
• Before starting work, isolate the product and accessories from the power source and secure them against
being switched back on again unintentionally.Only use materials approved for the respective application.
• Use only suitable tools that are in proper working order.
• Only use cleaned pipes and hoses that are free of dirt and corrosion.
• Never use abrasive or aggressive cleaning agents or solvents which could damage the outer coating
(e.g. markings, type plate, corrosion protection, etc.).
• Never clean the device with hard or pointed implements.
• Use only the specified materials and media for cleaning.
• Observe statutory, local and in-house hygiene regulations.
• Pay attention to order and cleanliness during maintenance and repair work. Prevent contamination from
entering the opened product or accessories. Store disassembled components and accessories directly in a
safe place.
• After completing maintenance and repair work, remove all tools, cleaning agents, and parts no longer
required from the work area.
• Only dispose of the product and accessories when they have been cleaned and are free of any residual
fluids.
• Dispose of all components, parts, operating and auxiliary materials as well as cleaning agents
professionally and in accordance with all locally applicable legal requirements and regulations.
• Dispose of electrical and electronic components through a specialized disposal company or return them
to the manufacturer.
12 | 68
Installation and operating manual