Installation and operating manual
12. Disassembly
Qualified service technicians (see section "2.3 Target group and personnel" on page 8)
12.1 Warning notices
DANGER
12.2 Disassembly steps
For disassembly work to be carried out, the following prerequisites must be fulfilled and the preparatory tasks
must have been completed.
Tools
•
Adjustable wrench
•
Water pump pliers
Personnel
Sudden escape of pressurized fluids
There is a danger of death or serious personal injury resulting from contact with fast
or suddenly escaping fluids or through bursting system parts.
•
Before starting work, depressurize the pressurized system and secure it against
unintentional pressurization.
Prerequisites
•
No material necessary
Material
QWIK-PURE
Protective equipment
To be worn at all times:
CS
®
57 | 68
Need help?
Do you have a question about the QWIK-PURE CS 400 and is the answer not in the manual?