Wasp WPL608 User Manual page 50

3.1.4.2.2 Static IP
Use this menu to set the printer's IP address, subnet mask and gateway.
Ethernet
Status
> Configure
Exit
Press and
to enter the option. Press
IP Address
000.000.000.000
Press button to move the cursor from left to right digits and press the
scroll the value from "0" to "9". Press
Static IP
SELECT:
MENU:
Press the
key to cancel the setting.
2/3
Configure
DHCP
> Static IP
Exit
buttons to select the different options and press
key to cancel the setting and return to the previous menu.
Subnet Mask
000.000.000.000
YES
NO
button printer will restart to reset the Ethernet module setting. Press
47
2/3
Gateway
000.000.000.000
button to next setting.
button
button to