Wasp WPL608 User Manual page 41

B. Bline Mode
Calibration
Gap Mode
> Bline Mode
Cont. Mode
Press the and
button to enter the black-mark sensor calibration mode.
B-1 Automatic
When enter the [Automatic] option, you will see the following message and the printer will
feed the black mark label to calibrate the sensor sensitivity automatically. When the
calibration process is completed, the LCD screen will return to the previous menu.
Bline Mode
Automatic
B-2 Manual
In case "Automatic" sensor calibration cannot apply to the media, please use the "Manual"
function to calibrate the bline sensor manually.
Bline Mode
Automatic
> Manual
Pre-Printed
When you select the [Manual] option, you will see the following message. Please complete
these steps：
2/4
Bline Mode
> Automatic
Manual
Pre-Printed
buttons to scroll the cursor to the sensor type. Press the
2/4
Paper Len.
00151 dot
Bline Size
0024 dot
1/4
1. Press the
the cursor from left digit to right digit,
and press the
the value from "0" to "9" and the "dot/
mm/ inch". Press the
button to set the paper length into the
printer.
2. Press the
the cursor from left digit to right digit,
and press the
the value from "0" to "9" and the "dot/
mm/ inch". Press the
button to set the bline size into the
printer.
38
button to move
button to set
button to move
button to set