Wasp WPL608 User Manual page 47

3.1.3.4 Stop Bit
(s)
Serial Comm.
Parity
Data Bits
> Stop Bit(s)
This option is used to set the RS-232 Stop Bits. The default setting is "1" stop bit. Press
and buttons to select the different Stop Bits and press
value into printer. When you enter this list, the option in the right side of ">" icon is the printer current
setting. Press
:
4/5
Stop Bit(s)
> 1
2
Exit
key to cancel the setting and return to the previous menu.
1/3
44
button to set the