Wasp WPL608 User Manual page 44

C. Cont. Mode
Calibration
Bline Mode
> Cont. Mode
Exit
Press the and
button to enter the black-mark sensor calibration mode.
C-1 Automatic
When you select the [Automatic] option, you will see the following message and the printer
will calibrate the sensor sensitivity automatically. When the calibration process is completed,
the LCD screen will return to the previous menu.
Cont. Mode
Automatic
C-2 Manual
In case "Automatic" sensor calibration cannot apply to the media, please use the "Manual"
function to calibrate the sensor manually.
Cont. Mode
Automatic
> Manual
Exit
When you select the [Manual] option, you will see the following message. Please complete
these steps：
Cont. Mode
Remove Label
Intensity
Ref. Level
Cont. Mode
Scan Paper
Intensity
Ref. Level
3/4
Cont. Mode
> Automatic
Manual
Exit
buttons to scroll the cursor to the sensor type. Press the
2/3
x
xxx
x
xxx
1/3
1. Remove the continuous label. Press
the button to set the value
into the printer.
2. Then, put the continuous label under
the media sensor. Press the
button to set the value into
the printer.
41