Baud Rate; Data Bits - Wasp WPL608 User Manual

3.1.3.1 Baud Rate

Serial Comm.
> Baud Rate
Parity

Data Bits

This option is used to set the RS-232 baud rate. The default setting is 9600 bps.
Press and
button to set the value into printer. When you enter this list, the baud rate value in the right side of
">" icon is the current setting in the printer. Press
to the previous menu.
3.1.3.2 Parity
Serial Comm.
Baud Rate
> Parity
Data Bits
This option is used to set the RS-232 parity. The default setting is "None". Press
buttons to select the different parity and press
printer. When you enter this list, the parity in the right side of ">" is the printer current setting. Press
key to cancel the setting and return to the previous menu.
3.1.3.3 Data Bits:
Serial Comm.
Baud Rate
Parity
> Data Bits
This option is used to set the RS-232 Data Bits. The default setting is "8" data bits. Press
and buttons to select the different Data Bits and press
value into printer. When you enter this list, the Data Bits in the right side of ">" icon is the printer
current setting. Press
1/5
Baud Rate
> 9600 bps
19200 bps
38400 bps
buttons to select the different baud rate and press
2/5
Parity
> None
Odd
Even
3/5
Data Bits
7
> 8
Exit
key to cancel the setting and return to the previous menu.
43
4/9
key to cancel the setting and return
1/4
button to set the value into
2/3
and
button to set the