Wasp WPL608 User Manual page 39

Gap Mode
Scan Backing
Intensity
Ref. Level
Gap Mode
Scan Paper
Intensity
Ref. Level
Gap Mode
Complete
Intensity
Ref. Level
A-3 Pre-Printed
This function is used to set the paper length and gap size before the system auto-calibrates
the sensor sensitivity. This function can be used to set the sensor sensitivity accurately.
Gap Mode
Manual
> Pre-Printed
Exit
When you select the [Pre-Printed] option, you will see the following message. Please
complete these steps：
3. Open the print head mechanism, put
the label backing (liner) under the
media sensor. Press the
button to set the value into the printer.
x
xxx
4. Then, put the label with liner under the
media sensor. Press the
button to set the value into the printer.
x
xxx
5. The gap sensor calibration is
complete. Press the
button the LCD screen will return to
the previous menu.
x
xxx
3/4
36
Media sensor
Label backing
(liner)
Media sensor
Label with liner