Ethernet - Wasp WPL608 User Manual

3.1.4 Ethernet

Use this menu to configure internal Ethernet configuration check the printer's Ethernet module
status, and reset the Ethernet module. This function is available on the LCD display when Ethernet
card is installed.
Press the
button to enter the option. Press the
previous menu.
Status
↓
IP Address
↓
MAC
↓
Exit
Note:
This function is available for 610 series only and option for 608 series.
3.1.4.1 Status: (IP Address / MAC)
Use this menu to check the Ethernet setting status.
3.1.4.1.1 IP Address
Ethernet
> Status
Configure
Exit
The IP address information will be shown on the LCD display. Please press
and
Ethernet
Configure
↓
DHCP
↓
Static IP
↓
Exit
1/3
Status
>
button to return to the previous menu.
buttons to select the different options and press
key to cancel the setting and return to the
Exit
1/3
IP Address
MAC
Exit
45
IP Address
0.0.0.0
Subnet Mask
0.0.0.0
Gateway
0.0.0.0
or